Custom Resource Definition - Application

Refer to the Kubernetes API documentation for the fields of the metadata field.

spec BackupSpec

type BackupType

Type is the type of backup in the sequence of backups of an Application.

BackupPlan is a reference to the BackupPlan to be backed up.

type BackupType

Type is the type of backup in the sequence of backups of an Application.

BackupPlan is a reference to the BackupPlan to be backed up.

type BackupType

Type is the type of backup in the sequence of backups of an Application.

BackupPlan is a reference to the BackupPlan to be backed up.

type BackupType

Type is the type of backup in the sequence of backups of an Application.

BackupPlan is a reference to the BackupPlan to be backed up.

status BackupStatus

BackupComponent

(Appears on: BackupComponentInfo, ClusterBackupPlanSpec)

BackupComponent defines the namespace and their configurations for backup

Field

Description

namespace string

hookConfig HookConfig

hookConfig defines backup pre/post hooks and their configurations.

includeResources ResourceSelector

IncludeResources specifies the resources included during backup

excludeResources ResourceSelector

ExcludedResources specifies the resources excluded during backup

BackupComponentInfo

Field

Description

BackupComponent BackupComponent

PartOf BackupPlanSelector

Name string

BackupCondition

(Appears on: BackupStatus)

BackupCondition specifies the current condition of a backup resource.

Field

Description

status Status

Status is the status of the condition.

timestamp Kubernetes meta/v1.Time

Timestamp is the time a condition occurred.

reason string

A brief message indicating details about why the component is in this condition.

phase OperationType

Phase defines the current phase of the controller. nolint:lll // directive continuation

BackupConfig

(Appears on: BackupPlanSpec)

BackupConfig defines the require configuration for taking the backup such as target and retention policy. NOTE: ClusterBackupConfig field in clusterbackupplan_types.go is similar to this structure. Changes made here might be required to be reflected there as well.

Field

Description

Target is the object reference for the backup target resources

retentionPolicy Kubernetes core/v1.ObjectReference

RetentionPolicy is the object reference for the policy of type retention defined

schedulePolicy SchedulePolicy

SchedulePolicy includes the object references of 2 type of cron schedule policy: incremental and full

maxIncrBackupsPerFullBackup byte

MaxIncrBackupsPerFullBackup is the number of incremental backups after which full backup will ge triggered. This is relevant only in case of immutable backups

BackupInfo

(Appears on: ClusterBackupStatus)

BackupInfo contains the relevant information to uniquely identify a child Backup created from a ClusterBackup

Field

Description

Backup ObjectReference of child Backup

status Status

Status status of child Backup

percentageCompletion byte

PercentageCompletion is the amount of backup operation completed.

location string

Location is the Backup’s location on the target

BackupPlan

BackupPlan is the Schema for the BackupPlan API

Field

Description

Refer to the Kubernetes API documentation for the fields of the metadata field.

spec BackupPlanSpec

backupNamespace string

Namespace is the namespace from where the components of backupPlan to be selected Deprecated: After removal of cluster scope CRD support, Backup namespace will be same as BackupPlan namespace.

backupConfig BackupConfig

BackupConfig is the type containing the object references for all the configurations needed for backup operation

backupPlanComponents BackupPlanComponents

BackupPlanComponents includes all the components which defines this BackupPlan i.e Helm charts, operators and label based resources

hookConfig HookConfig

hookConfig defines backup pre/post hooks and their configurations.

includeResources ResourceSelector

IncludeResources specify resources to include for namespace scope backup based on LabelSelector & GVKSelector

excludeResources ResourceSelector

ExcludeResources specify resources to exclude for namespace scope backup based on LabelSelector & GVKSelector

encryption Encryption

Encryption specify how to encrypt backups on target for this backupPlan

backupNamespace string

Namespace is the namespace from where the components of backupPlan to be selected Deprecated: After removal of cluster scope CRD support, Backup namespace will be same as BackupPlan namespace.

backupConfig BackupConfig

BackupConfig is the type containing the object references for all the configurations needed for backup operation

backupPlanComponents BackupPlanComponents

BackupPlanComponents includes all the components which defines this BackupPlan i.e Helm charts, operators and label based resources

hookConfig HookConfig

hookConfig defines backup pre/post hooks and their configurations.

includeResources ResourceSelector

IncludeResources specify resources to include for namespace scope backup based on LabelSelector & GVKSelector

excludeResources ResourceSelector

ExcludeResources specify resources to exclude for namespace scope backup based on LabelSelector & GVKSelector

encryption Encryption

Encryption specify how to encrypt backups on target for this backupPlan

backupNamespace string

Namespace is the namespace from where the components of backupPlan to be selected Deprecated: After removal of cluster scope CRD support, Backup namespace will be same as BackupPlan namespace.

backupConfig BackupConfig

BackupConfig is the type containing the object references for all the configurations needed for backup operation

backupPlanComponents BackupPlanComponents

BackupPlanComponents includes all the components which defines this BackupPlan i.e Helm charts, operators and label based resources

hookConfig HookConfig

hookConfig defines backup pre/post hooks and their configurations.

includeResources ResourceSelector

IncludeResources specify resources to include for namespace scope backup based on LabelSelector & GVKSelector

excludeResources ResourceSelector

ExcludeResources specify resources to exclude for namespace scope backup based on LabelSelector & GVKSelector

encryption Encryption

Encryption specify how to encrypt backups on target for this backupPlan

backupNamespace string

Namespace is the namespace from where the components of backupPlan to be selected Deprecated: After removal of cluster scope CRD support, Backup namespace will be same as BackupPlan namespace.

backupConfig BackupConfig

BackupConfig is the type containing the object references for all the configurations needed for backup operation

backupPlanComponents BackupPlanComponents

BackupPlanComponents includes all the components which defines this BackupPlan i.e Helm charts, operators and label based resources

hookConfig HookConfig

hookConfig defines backup pre/post hooks and their configurations.

includeResources ResourceSelector

IncludeResources specify resources to include for namespace scope backup based on LabelSelector & GVKSelector

excludeResources ResourceSelector

ExcludeResources specify resources to exclude for namespace scope backup based on LabelSelector & GVKSelector

encryption Encryption

Encryption specify how to encrypt backups on target for this backupPlan

status BackupPlanStatus

BackupPlanComponents

(Appears on: BackupPlanSpec)

BackupPlanComponents contains the 3 types of components, helm charts, operators and custom label-based resources

Field

Description

helmReleases []string

HelmReleases is the list of release names

operators []OperatorSelector

Operators is the list of operator names and their selectors

custom []Kubernetes meta/v1.LabelSelector

Deprecated: Custom is the combination of label selectors including match labels and match expressions

customSelector CustomSelector

CustomSelector specify resource selection for custom resources, This is the combination of LabelSelector including match labels and match expressions and GVKSelector which could be GroupVersionKind & Objects

BackupPlanInfo

(Appears on: ClusterBackupPlanStatus)

BackupPlanInfo defines the object reference and status of a backupPlan

Field

Description

BackupPlan is the object reference of a backupPlan

partOf BackupPlanSelector

PartOf specify how backupPlan is selected, it could be by NamespaceSelector or by BackupComponent

name string

Name will specify namespace selector’s name if backupPlan is PartOf NamespaceSelector Name will be empty if backupPlan is PartOf BackupComponents

status Status

Status is the status of the backupPlan

BackupPlanSelector (`string` alias)

(Appears on: BackupComponentInfo, BackupPlanInfo)

BackupPlanSelector used in ClusterBackupPlan Status to identify how corresponding backupPlan is selected by, it could be by NamespaceSelector or by BackupComponent

BackupPlanSpec

(Appears on: BackupPlan)

BackupPlanSpec defines the desired state of BackupPlan

Field

Description

backupNamespace string

Namespace is the namespace from where the components of backupPlan to be selected Deprecated: After removal of cluster scope CRD support, Backup namespace will be same as BackupPlan namespace.

backupConfig BackupConfig

BackupConfig is the type containing the object references for all the configurations needed for backup operation

backupPlanComponents BackupPlanComponents

BackupPlanComponents includes all the components which defines this BackupPlan i.e Helm charts, operators and label based resources

hookConfig HookConfig

hookConfig defines backup pre/post hooks and their configurations.

includeResources ResourceSelector

IncludeResources specify resources to include for namespace scope backup based on LabelSelector & GVKSelector

excludeResources ResourceSelector

ExcludeResources specify resources to exclude for namespace scope backup based on LabelSelector & GVKSelector

encryption Encryption

Encryption specify how to encrypt backups on target for this backupPlan

BackupPlanStats

(Appears on: BackupPlanStatus)

BackupPlanStats defines the stats for a BackupPlan

Field

Description

backupSummary BackupSummary

restoreSummary RestoreSummary

immutable bool

Immutable specify whether a backup data is going to be immutable.

BackupPlanStatus

(Appears on: BackupPlan)

BackupPlanStatus defines the observed state of BackupPlan

Field

Description

status Status

Status defines the status oif the application resource as available when no operation is running and unavailable when a backup or restore operation is in progress

scope ComponentScope

Scope indicates scope of component in BackupPlan i.e. App or Namespace.

applicationType ApplicationType

ApplicationType is the type of BackupPlan defining backup

incrementalCron Kubernetes core/v1.ObjectReference

Deprecated: IncrementalCron will be used as an list of references of Crons

fullBackupCron Kubernetes core/v1.ObjectReference

Deprecated: FullBackupCron will be used as an list of references of Crons

incrementalCrons map[string]k8s.io/api/core/v1.ObjectReference

fullBackupCrons map[string]k8s.io/api/core/v1.ObjectReference

stats BackupPlanStats

BackupScheduleType (`string` alias)

BackupScheduleType specifies the type of schedule which triggered the backup

BackupSpec

(Appears on: Backup)

BackupSpec defines the desired state of Backup

Field

Description

type BackupType

Type is the type of backup in the sequence of backups of an Application.

BackupPlan is a reference to the BackupPlan to be backed up.

BackupStats

(Appears on: BackupStatus)

BackupStats specifies the stats of a Backup

Field

Description

Target is the reference to a Target backuped up Deprecated: Target information moved to TargetInfo field

targetInfo TargetInfo

TargetInfo is the information to a Target backed up

latestInProgressRestore Kubernetes core/v1.ObjectReference

LatestInProgressRestore is the reference to the latest InProgress Restore of a Backup

latestCompletedRestore Kubernetes core/v1.ObjectReference

LatestCompletedRestore is the reference to the latest Completed Restore of a Backup

hookExists bool

HookExists is a bool value that states if a backup has hooks in backup plan

encryption Encryption

Encryption specifies encryption details of a backup

immutable bool

Immutable specify whether a backup data is immutable

BackupStatus

(Appears on: Backup)

BackupStatus defines the observed state of Backup

Field

Description

backupScope ComponentScope

BackupScope indicates scope of component in backup i.e. App or Namespace.

applicationType ApplicationType

ApplicationType is the type of Application backed up in the App Scoped backup

type BackupType

Type indicates the backup type in backup i.e. Full, Incremental or Mixed.

location string

Location is the absolute path of the target where backup resides.

startTimestamp Kubernetes meta/v1.Time

StartTimestamp is the time a backup was started.

completionTimestamp Kubernetes meta/v1.Time

CompletionTimestamp is the time a backup was finished.

phase OperationType

Phase is the current phase of the backup operation.

phaseStatus Status

PhaseStatus is the status of phase backup operation going through.

status Status

Status is the status of the backup operation.

size k8s.io/apimachinery/pkg/api/resource.Quantity

Size is the aggregate size of the data backuped up.

percentageCompletion byte

PercentageCompletion is the amount of backup operation completed.

expirationTimestamp Kubernetes meta/v1.Time

ExpirationTimeStamp is the time a backup will not be available after retention.

snapshot Snapshot

Todo: Do we need this option as optional one? Todo: This is optional because, we are allowing the custom backup as empty Snapshot specifies the contents of captured backup.

condition []BackupCondition

Condition is the current condition of hooks while backup.

hookStatus HookComponentStatus

HookStatus specifies pre/post hook execution status for current backup.

stats BackupStats

Duration is the amount of time the backup process took to finish.

BackupSummary

(Appears on: BackupPlanStats)

BackupSummary comprises of backup object references and count of backups with different statuses

Field

Description

inProgressBackup Kubernetes core/v1.ObjectReference

InProgressBackup is the reference to an InProgress backup of a BackupPlan

lastSuccessfulBackup Kubernetes core/v1.ObjectReference

LastSuccessfulBackup is the reference to Latest available Backup of a BackupPlan

latestBackup Kubernetes core/v1.ObjectReference

LatestBackup is the reference to Latest Backup in any state, of a BackupPlan

totalAvailableBackups uint32

TotalAvailableBackups is the count of total number of Available Backups

totalFailedBackups uint32

TotalFailedBackups is the count of total number of InProgress Backups

totalQueuedBackups uint32

TotalQueuedBackups is the count of total number of Queued Backups

pvcExistsForBackup bool

PVCExistsForBackup is a bool value that states if the latest backup of a backup plan has PVCs in its data component

BackupType (`string` alias)

(Appears on: BackupSpec, BackupStatus, ClusterBackupSpec, ClusterBackupStatus, DataSnapshot)

BackupType defines the type backup instance of an BackupPlan

CleanupConfig

(Appears on: PolicySpec)

CleanupConfig is the configuration for the PolicyType: Cleanup

Field

Description

backupDays int

BackupDays is the age of backups to be cleaned

ClusterBackup

ClusterBackup is the Schema for the ClusterBackup API

Field

Description

Refer to the Kubernetes API documentation for the fields of the metadata field.

spec ClusterBackupSpec

type BackupType

Type is the type of clusterBackup in the sequence of clusterBackups.

clusterBackupPlan Kubernetes core/v1.ObjectReference

ClusterBackupPlan is a reference to the ClusterBackupPlan to be backed up.

type BackupType

Type is the type of clusterBackup in the sequence of clusterBackups.

clusterBackupPlan Kubernetes core/v1.ObjectReference

ClusterBackupPlan is a reference to the ClusterBackupPlan to be backed up.

type BackupType

Type is the type of clusterBackup in the sequence of clusterBackups.

clusterBackupPlan Kubernetes core/v1.ObjectReference

ClusterBackupPlan is a reference to the ClusterBackupPlan to be backed up.

type BackupType

Type is the type of clusterBackup in the sequence of clusterBackups.

clusterBackupPlan Kubernetes core/v1.ObjectReference

ClusterBackupPlan is a reference to the ClusterBackupPlan to be backed up.

status ClusterBackupStatus

ClusterBackupCondition

(Appears on: ClusterBackupStatus)

ClusterBackupCondition specifies the current condition of a clusterBackup resource.

Field

Description

phase OperationType

Phase defines the current phase of the controller.

status Status

Status is the status of the condition.

timestamp Kubernetes meta/v1.Time

Timestamp is the time a condition occurred.

reason string

A brief message indicating details about why clusterBackup is in this condition.

ClusterBackupConfig

(Appears on: ClusterBackupPlanSpec)

ClusterBackupConfig defines the require configuration for taking the backup such as target and retention policy. NOTE: BackupConfig field in backupplan_types.go is similar to this structure. Changes made here might be required to be reflected there as well.

Field

Description

Target is the object reference for the backup target resources

retentionPolicy Kubernetes core/v1.ObjectReference

RetentionPolicy is the object reference for the policy of type retention defined

schedulePolicy ClusterBackupSchedulePolicy

SchedulePolicy includes the object references of 2 type of cron schedule policy: incremental and full

maxIncrBackupsPerFullBackup byte

MaxIncrBackupsPerFullBackup is the number of incremental backups after which full backup will ge triggered. This is relevant only in case of immutable backups

ClusterBackupPlan

ClusterBackupPlan is the Schema for the ClusterBackupPlan API

Field

Description

Refer to the Kubernetes API documentation for the fields of the metadata field.

spec ClusterBackupPlanSpec

backupComponents []BackupComponent

BackupComponents defines all the BackupComponents for which backups are to be taken. It includes namespaces and their configurations

namespaceSelector []NamespaceSelector

NamespaceSelector defines namespaces for which backups are to be taken based on NamespaceSelector(labels & match expression) & their configurations

backupConfig ClusterBackupConfig

BackupConfig is the type containing the object references for all the configurations needed for backup operation

includeResources ResourceSelector

IncludeResources specifies the resources to be explicitly included during backup

excludeResources ResourceSelector

ExcludedResources specifies the resources to be excluded from the backup

encryption Encryption

Encryption specify how to encrypt backups on target for this backupPlan

backupComponents []BackupComponent

BackupComponents defines all the BackupComponents for which backups are to be taken. It includes namespaces and their configurations

namespaceSelector []NamespaceSelector

NamespaceSelector defines namespaces for which backups are to be taken based on NamespaceSelector(labels & match expression) & their configurations

backupConfig ClusterBackupConfig

BackupConfig is the type containing the object references for all the configurations needed for backup operation

includeResources ResourceSelector

IncludeResources specifies the resources to be explicitly included during backup

excludeResources ResourceSelector

ExcludedResources specifies the resources to be excluded from the backup

encryption Encryption

Encryption specify how to encrypt backups on target for this backupPlan

backupComponents []BackupComponent

BackupComponents defines all the BackupComponents for which backups are to be taken. It includes namespaces and their configurations

namespaceSelector []NamespaceSelector

NamespaceSelector defines namespaces for which backups are to be taken based on NamespaceSelector(labels & match expression) & their configurations

backupConfig ClusterBackupConfig

BackupConfig is the type containing the object references for all the configurations needed for backup operation

includeResources ResourceSelector

IncludeResources specifies the resources to be explicitly included during backup

excludeResources ResourceSelector

ExcludedResources specifies the resources to be excluded from the backup

encryption Encryption

Encryption specify how to encrypt backups on target for this backupPlan

backupComponents []BackupComponent

BackupComponents defines all the BackupComponents for which backups are to be taken. It includes namespaces and their configurations

namespaceSelector []NamespaceSelector

NamespaceSelector defines namespaces for which backups are to be taken based on NamespaceSelector(labels & match expression) & their configurations

backupConfig ClusterBackupConfig

BackupConfig is the type containing the object references for all the configurations needed for backup operation

includeResources ResourceSelector

IncludeResources specifies the resources to be explicitly included during backup

excludeResources ResourceSelector

ExcludedResources specifies the resources to be excluded from the backup

encryption Encryption

Encryption specify how to encrypt backups on target for this backupPlan

status ClusterBackupPlanStatus

ClusterBackupPlanCondition

(Appears on: ClusterBackupPlanStatus)

ClusterBackupPlanCondition specifies the current condition of a cluster backup plan resource.

Field

Description

status Status

Status is the status of the condition.

timestamp Kubernetes meta/v1.Time

Timestamp is the time a condition occurred.

reason string

A brief message indicating details about why the component is in this condition.

ClusterBackupPlanSpec

(Appears on: ClusterBackupPlan)

ClusterBackupPlanSpec defines the desired state of ClusterBackupPlan

Field

Description

backupComponents []BackupComponent

BackupComponents defines all the BackupComponents for which backups are to be taken. It includes namespaces and their configurations

namespaceSelector []NamespaceSelector

NamespaceSelector defines namespaces for which backups are to be taken based on NamespaceSelector(labels & match expression) & their configurations

backupConfig ClusterBackupConfig

BackupConfig is the type containing the object references for all the configurations needed for backup operation

includeResources ResourceSelector

IncludeResources specifies the resources to be explicitly included during backup

excludeResources ResourceSelector

ExcludedResources specifies the resources to be excluded from the backup

encryption Encryption

Encryption specify how to encrypt backups on target for this backupPlan

ClusterBackupPlanStats

(Appears on: ClusterBackupPlanStatus)

ClusterBackupPlanStats defines the stats for a ClusterBackupPlan

Field

Description

clusterBackupSummary ClusterBackupSummary

clusterRestoreSummary ClusterRestoreSummary

immutable bool

Immutable specify whether a backup data is going to be immutable

ClusterBackupPlanStatus

(Appears on: ClusterBackupPlan)

ClusterBackupPlanStatus defines the observed state of ClusterBackupPlan

Field

Description

status Status

Status defines the current state of the ClusterBackupPlan resource. Available state ClusterBackupPlan only can be used for ClusterBackup

backupPlans map[string]github.com/trilioData/k8s-triliovault/api/v1.BackupPlanInfo

BackupPlans is the map of backupPlan name and its object ref managed by cluster backup plan

incrementalCrons map[string]k8s.io/api/core/v1.ObjectReference

fullBackupCrons map[string]k8s.io/api/core/v1.ObjectReference

condition []ClusterBackupPlanCondition

Condition is the current condition of a cluster backup plan.

stats ClusterBackupPlanStats

ClusterBackupSchedulePolicy

(Appears on: ClusterBackupConfig)

ClusterBackupSchedulePolicy contains the object references for incremental or full backup type schedule policy

Field

Description

incrementalBackupPolicy Kubernetes core/v1.ObjectReference

IncrementalBackupPolicy is the object reference for the policy of type schedule defined

fullBackupPolicy Kubernetes core/v1.ObjectReference

FullBackupPolicy is the object reference for the policy of type schedule defined

ClusterBackupSpec

(Appears on: ClusterBackup)

ClusterBackupSpec defines the desired state of ClusterBackup

Field

Description

type BackupType

Type is the type of clusterBackup in the sequence of clusterBackups.

clusterBackupPlan Kubernetes core/v1.ObjectReference

ClusterBackupPlan is a reference to the ClusterBackupPlan to be backed up.

ClusterBackupStats

(Appears on: ClusterBackupStatus)

ClusterBackupStats specifies the stats of a ClusterBackup

Field

Description

Target is the reference to a Target backuped up Deprecated: Target information moved to TargetInfo field

targetInfo TargetInfo

TargetInfo is the information to a Target backed up

latestInProgressClusterRestore Kubernetes core/v1.ObjectReference

LatestInProgressClusterRestore is the reference to the latest InProgress ClusterRestore of a ClusterBackup

lastCompletedClusterRestore Kubernetes core/v1.ObjectReference

LastCompletedClusterRestore is the reference to the latest Completed ClusterRestore of a ClusterBackup

hookExists bool

HookExists is a bool value that states if a ClusterBackup has hooks in ClusterBackupPlan

encryption Encryption

Encryption specifies encryption details of a ClusterBackup

immutable bool

Immutable specify whether a clusterBackup data is immutable

ClusterBackupStatus

(Appears on: ClusterBackup)

ClusterBackupStatus defines the observed state of ClusterBackup

Field

Description

type BackupType

Type indicates the ClusterBackup type in backup i.e. Full, Incremental or Mixed.

location string

Location is the absolute path of the target where backup resides.

startTimestamp Kubernetes meta/v1.Time

StartTimestamp is the time when ClusterBackup was started.

completionTimestamp Kubernetes meta/v1.Time

CompletionTimestamp is the time when ClusterBackup finished.

status Status

Status is the status of the ClusterBackup operation.

size k8s.io/apimachinery/pkg/api/resource.Quantity

Size is the aggregate size of the data backuped up.

percentageCompletion byte

PercentageCompletion is the percentage of ClusterBackup operation completed.

expirationTimestamp Kubernetes meta/v1.Time

ExpirationTimeStamp is the time after which a ClusterBackup will not be available after retention.

condition []ClusterBackupCondition

Condition is the conditions a ClusterBackup goes through during backup TODO: Define a separate condition struct

Duration is the amount of time the ClusterBackup process took to finish.

backupInfos map[string]github.com/trilioData/k8s-triliovault/api/v1.BackupInfo

BackupInfos contains the information of the child Backup CRs created by this ClusterBackup

stats ClusterBackupStats

ClusterBackupSummary

(Appears on: ClusterBackupPlanStats)

ClusterBackupSummary comprises of ClusterBackup object references and count of ClusterBackups with different statuses

Field

Description

inProgressClusterBackup Kubernetes core/v1.ObjectReference

InProgressClusterBackup is the reference to an InProgress ClusterBackup of a ClusterBackupPlan

lastSuccessfulClusterBackup Kubernetes core/v1.ObjectReference

LastSuccessfulClusterBackup is the reference to Latest available ClusterBackup of a ClusterBackupPlan

latestClusterBackup Kubernetes core/v1.ObjectReference

LatestClusterBackup is the reference to Latest ClusterBackup in any state, of a ClusterBackupPlan

totalAvailableClusterBackups uint32

TotalAvailableClusterBackups is the count of total number of Available ClusterBackups

totalFailedClusterBackups uint32

TotalFailedClusterBackups is the count of total number of Failed ClusterBackups.

totalQueuedClusterBackups uint32

TotalQueuedClusterBackups is the count of total number of Queued ClusterBackups.

pvcExistsForBackup bool

PVCExistsForBackup is a bool value that states if the latest clusterBackup of a clusterBackupPlan has any backup that has PVCs in its data component

ClusterRestore

ClusterRestore defines the desired state of ClusterRestore

Field

Description

Refer to the Kubernetes API documentation for the fields of the metadata field.

spec ClusterRestoreSpec

source ClusterRestoreSource

Type is the type of source for ClusterRestore

globalConfig RestoreConfig

GlobalConfig is the global restore configuration which is applicable for the components of restore unless explicitly overridden at the component level

components []ComponentConfig

Components defines the components and their custom configuration using which individual component restore is to be done

excludeComponents []string

ExcludeComponents specifies the components(namespaces) to be excluded from the ClusterRestore

cleanupOnFailure bool

CleanupOnFailure is flag to perform cleanup for all restores when ClusterRestore has failed. Deprecated: CleanupOnFailure flag is now moved under ActionFlags struct

actionFlags ActionFlags

encryption Encryption

Encryption specify encryption key to decrypt the encrypted data.

source ClusterRestoreSource

Type is the type of source for ClusterRestore

globalConfig RestoreConfig

GlobalConfig is the global restore configuration which is applicable for the components of restore unless explicitly overridden at the component level

components []ComponentConfig

Components defines the components and their custom configuration using which individual component restore is to be done

excludeComponents []string

ExcludeComponents specifies the components(namespaces) to be excluded from the ClusterRestore

cleanupOnFailure bool

CleanupOnFailure is flag to perform cleanup for all restores when ClusterRestore has failed. Deprecated: CleanupOnFailure flag is now moved under ActionFlags struct

actionFlags ActionFlags

encryption Encryption

Encryption specify encryption key to decrypt the encrypted data.

source ClusterRestoreSource

Type is the type of source for ClusterRestore

globalConfig RestoreConfig

GlobalConfig is the global restore configuration which is applicable for the components of restore unless explicitly overridden at the component level

components []ComponentConfig

Components defines the components and their custom configuration using which individual component restore is to be done

excludeComponents []string

ExcludeComponents specifies the components(namespaces) to be excluded from the ClusterRestore

cleanupOnFailure bool

CleanupOnFailure is flag to perform cleanup for all restores when ClusterRestore has failed. Deprecated: CleanupOnFailure flag is now moved under ActionFlags struct

actionFlags ActionFlags

encryption Encryption

Encryption specify encryption key to decrypt the encrypted data.

source ClusterRestoreSource

Type is the type of source for ClusterRestore

globalConfig RestoreConfig

GlobalConfig is the global restore configuration which is applicable for the components of restore unless explicitly overridden at the component level

components []ComponentConfig

Components defines the components and their custom configuration using which individual component restore is to be done

excludeComponents []string

ExcludeComponents specifies the components(namespaces) to be excluded from the ClusterRestore

cleanupOnFailure bool

CleanupOnFailure is flag to perform cleanup for all restores when ClusterRestore has failed. Deprecated: CleanupOnFailure flag is now moved under ActionFlags struct

actionFlags ActionFlags

encryption Encryption

Encryption specify encryption key to decrypt the encrypted data.

status ClusterRestoreStatus

ClusterRestoreCondition

(Appears on: ClusterRestoreStatus)

Field

Description

phase OperationType

Phase defines the current phase of the controller.

status Status

Status is the status of the cluster restore.

timestamp Kubernetes meta/v1.Time

Timestamp is the time a condition occurred.

reason string

A brief message indicating details about why the component is in this condition.

ClusterRestoreSource

(Appears on: ClusterRestoreSpec)

Field

Description

type ClusterRestoreSourceType

Type is the type of source for restore

clusterBackup Kubernetes core/v1.ObjectReference

ClusterBackup is a reference to the ClusterBackup instance restored if type is ClusterBackup.

Target is a reference to the Target instance where from restore is performed if type is Location.

location string

Location is an absolute path to remote target from where restore is performed if type is Location.

clusterBackupPlan Kubernetes core/v1.ObjectReference

ClusterBackupPlan is a reference to the ClusterBackupPlan whose latest successful backup is to be restored.

ClusterRestoreSourceType (`string` alias)

(Appears on: ClusterRestoreSource)

ClusterRestoreSpec

(Appears on: ClusterRestore)

ClusterRestoreSpec defines the source from where the ClusterRestore is to be done

Field

Description

source ClusterRestoreSource

Type is the type of source for ClusterRestore

globalConfig RestoreConfig

GlobalConfig is the global restore configuration which is applicable for the components of restore unless explicitly overridden at the component level

components []ComponentConfig

Components defines the components and their custom configuration using which individual component restore is to be done

excludeComponents []string

ExcludeComponents specifies the components(namespaces) to be excluded from the ClusterRestore

cleanupOnFailure bool

CleanupOnFailure is flag to perform cleanup for all restores when ClusterRestore has failed. Deprecated: CleanupOnFailure flag is now moved under ActionFlags struct

actionFlags ActionFlags

encryption Encryption

Encryption specify encryption key to decrypt the encrypted data.

ClusterRestoreStats

(Appears on: ClusterRestoreStatus)

ClusterRestoreStats defines the stats for a RestorCluster

Field

Description

clusterBackupPlan Kubernetes core/v1.ObjectReference

ClusterBackupPlan is the reference to ClusterBackupPlan associated with ClusterRestore

clusterBackup Kubernetes core/v1.ObjectReference

ClusterBackup is the reference to the ClusterBackup associated with ClusterRestore

ClusterRestoreStatus

(Appears on: ClusterRestore)

ClusterRestoreStatus defines the observed state of ClusterRestore

Field

Description

startTimestamp Kubernetes meta/v1.Time

StartTimestamp is the time when ClusterRestore was started.

completionTimestamp Kubernetes meta/v1.Time

CompletionTimestamp is the time when ClusterRestore finished.

phase OperationType

Phase is the current phase of the ClusterRestore operation.

phaseStatus Status

PhaseStatus is the status of phase ClusterRestore operation going through.

status Status

Status is the status of the ClusterRestore operation.

size k8s.io/apimachinery/pkg/api/resource.Quantity

Size is the aggregate size of the data restored back.

percentageCompletion byte

PercentageCompletion is the percentage of ClusterRestore operation completed.

condition []ClusterRestoreCondition

Condition is the overall condition of cluster restore resource.

Duration is the amount of time the ClusterRestore process took to finish.

components map[string]github.com/trilioData/k8s-triliovault/api/v1.ComponentInfo

ComponentInfos contains information related to each individual backup to be restored

createdNamespaces []string

CreatedNamespaces are the namespaces created for restores.

stats ClusterRestoreStats

protectingResources []Resource

ProtectingResources lists the Trilio resources and dependent resources which are getting created after user cluster restore operation. It’s applicable only if ProtectRestoredApp is set to true.

ClusterRestoreSummary

(Appears on: ClusterBackupPlanStats)

ClusterRestoreSummary comprises of ClusterRestore object references and count of ClusterRestore with different statuses

Field

Description

lastSuccessfulClusterRestore Kubernetes core/v1.ObjectReference

LastSuccessfulClusterRestore is the reference to Latest completed ClusterRestore of a ClusterBackupPlan

totalInProgressClusterRestores uint32

TotalInProgressClusterRestores is the count of total number of InProgress ClusterRestores

totalCompletedClusterRestores uint32

TotalCompletedClusterRestores is the count of total number of Completed ClusterRestores

totalFailedClusterRestores uint32

TotalFailedClusterRestores is the count of total number of Failed ClusterRestores

ComponentConfig

(Appears on: ClusterRestoreSpec)

Field

Description

backupNamespace string

restoreNamespace string

restoreConfig RestoreConfig

hookConfig HookConfig

ComponentInfo

(Appears on: ClusterRestoreStatus)

Field

Description

location string

Location is the location of the backup on target.

Backup is the reference of the Backup CR used for backing up this component

restore Kubernetes core/v1.ObjectReference

Restore is the reference of the Restore CR used for restoring this component.

restoreStatus Status

Status is the status of particular restore.

percentageCompletion byte

PercentageCompletion is the amount of restore operation completed.

ComponentScope (`string` alias)

(Appears on: BackupPlanStatus, BackupStatus, RestoreStatus)

ComponentScope indicates scope of components i.e. [App or Namespace] present in backup or restore

ComponentStatus

(Appears on: RestoreCustom, RestoreHelm, RestoreOperator)

ComponentStatus defines the details of restore of application component.

Field

Description

existingResource []Resource

ExistingResource specifies the resources already existing in cluster defined in application.

skippedResources []Resource

SkippedResources specifies the resources skipped while restoring.

failedResources []Resource

FailedResources specifies the resources for which the restore operation failed

newResourcesAdded []Resource

NewResourcesAdded specifies the resources added(duplicated and modified) during restore.

excludedResources []Resource

ExcludedResources specifies the resources excluded during restore

failedCleanupResources []Resource

FailedCleanupResources specified the resources which doesn’t get clean up in failed restore

transformStatus []TransformStatus

TransformStatus is the status of transformation performed

phase RestorePhase

Phase is the current phase of the application component while restore.

phaseStatus Status

PhaseStatus is the status of phase restore operation going through.

reason string

A brief message indicating details about why the application component is in this state.

Conditions

(Appears on: DataSnapshot)

Field

Description

status Status

Status is the status of the condition.

timestamp Kubernetes meta/v1.Time

Timestamp is the time a condition occurred.

reason string

A brief message indicating details about why the component is in this condition.

phase OperationType

Phase defines the current phase of the data components.

ContainerHookStatus

(Appears on: PodHookStatus)

ContainerHookStatus defines hook execution status for a containers

Field

Description

containerName string

ContainerName is container in which hooks are executed.

preHookStatus PrePostHookStatus

PreHookStatus defines status for pre hooks

postHookStatus PrePostHookStatus

PostHookStatus defines status for post hooks

CronSpec

(Appears on: SchedulePolicy)

CronSpec defines the Schedule string and the cronjob reference. The Schedule string will only be visible to the user to be configured, the reference will be set by the controller Deprecated: Instead of using single cron string, schedule policy will use list of cron string

Field

Description

schedule string

Crons

(Appears on: PolicySpec)

Crons defines the list of Schedule string and the cronjob references. The list of Schedule string will only be visible to the user to be configured, and the references will be set by the controller

Field

Description

schedule []string

Custom

(Appears on: RestoreCustom, Snapshot)

Custom defines the snapshot of Custom defined application.

Field

Description

resources []Resource

Resources defines the Kubernetes resources found from Custom application.

dataSnapshots []DataSnapshot

DataSnapshot specifies the Snapshot of the Volumes resources in the Custom defined application.

warnings []string

Warnings is the list of warnings captured during backup or restore of an application

CustomSelector

(Appears on: BackupPlanComponents)

CustomSelector defines custom resource selection using SelectResources which defines include resources & ExcludeResources specify resource exclusion based on Label based & GVK based selection

Field

Description

selectResources ResourceSelector

SelectResources specify resource selection based on LabelSelector & GVKSelector

excludeResources ResourceSelector

ExcludeResources specify resource exclusion based on LabelSelector & GVKSelector

CustomTransform

(Appears on: TransformComponents)

CustomTransform specifies transformation configuration for Custom label-based resources

Field

Description

transformName string

TransformName specifies the name of transformation

resources Resource

Resources specifies the resources for which transformation needs to be applied

jsonPatches []Patch

JSONPatches specifies the JSON patches to be applied

DataSnapshot

(Appears on: Custom, Helm, Operator)

DataSnapshot defines Snapshot of a Persistent Volume

Field

Description

backupType BackupType

BackupType is the type of Volume backup in the sequence of backups.

location string

Location is the absolute path of qcow2 image of a volume in the target.

persistentVolumeClaimName string

PersistentVolumeClaimName is the name of PersistentVolumeClaim which is bound to Volume.

persistentVolumeClaimMetadata string

PersistentVolumeClaimMetadata is the metadata of PersistentVolumeClaim which is bound to Volume.

operatorResourceVolume bool

OperatorResourceVolume will be true for the PVC created by the operator resource.

volumeSnapshot VolumeSnapshot

VolumeSnapshot specifies the CSI snapshot of a Persistent Volume.

snapshotSize k8s.io/apimachinery/pkg/api/resource.Quantity

SnapshotSize is the size of captured snapshot of a Persistent Volume.

size k8s.io/apimachinery/pkg/api/resource.Quantity

Size is the size of complete backup/restore.

uploaded bool

Uploaded is to imply whether volume snapshot taken is uploaded to target.

error string

Error is the error occurred while backing up data component if any.

podContainersMap []PodContainers

PodContainersMap is the set of Pod-Containers which share Persistent Volume.

conditions []Conditions

Conditions are the current statuses for backup and restore PVCs.

DayOfWeek (`string` alias)

(Appears on: RetentionConfig)

Encryption

(Appears on: BackupPlanSpec, BackupStats, ClusterBackupPlanSpec, ClusterBackupStats, ClusterRestoreSpec, RestoreSpec)

Encryption defines encryption secret to encrypt/decrypt backup data on target

Field

Description

encryptionSecret Kubernetes core/v1.ObjectReference

EncryptionSecret is object ref of a secret which contains encryption key for backup encryption

GroupVersionKind

(Appears on: Owner, Resource, TransformationError)

GroupVersionKind defines the Kubernetes resource type

Field

Description

group string

version string

kind string

Helm

(Appears on: Operator, RestoreHelm, Snapshot)

Helm defines the snapshot of application defined by a Helm.

Field

Description

release string

Release string is the name of release

newRelease string

NewRelease string is the new release name which will get used while validation and restore process

revision int32

Revision defines the version of deployed release backed up

resource Resource

Deprecated: Resource is the captured GVK (secret or configmap) and corresponding object names slice.

resources []Resource

Resources are the helm release resources with their GVK and Name

storageBackend HelmStorageBackend

StorageBackend is the enum which can be either configmaps and secrets

version HelmVersion

Version represents the Helm binary version used at the time of snapshot

dataSnapshots []DataSnapshot

DataSnapshot specifies the Snapshot of the Volumes defined in the helm chart resources.

warnings []string

Warnings is the list of warnings captured during backup or restore of an application

HelmStorageBackend (`string` alias)

(Appears on: Helm)

HelmStorageBackend defines the enum for the types of storage backend from where the helm release is backed-up

HelmTransform

(Appears on: TransformComponents)

HelmTransform specifies transformation configuration for Helm

Field

Description

transformName string

TransformName specifies the name of transformation

release string

Release specifies the release name for which the transformation is to be done

set []KeyValue

Set specifies the key-value pair to be set

HelmVersion (`string` alias)

(Appears on: Helm)

HelmVersion defines the version of helm binary used while backup; currently supported version is v3

Hook

Hook is the Schema for the hooks API.

Field

Description

Refer to the Kubernetes API documentation for the fields of the metadata field.

spec HookSpec

pre HookExecution

PreHook is the Hook executed to quiesce the application before backup operation

post HookExecution

PostHook is the Hook executed to unquiesce the application after backup operation

pre HookExecution

PreHook is the Hook executed to quiesce the application before backup operation

post HookExecution

PostHook is the Hook executed to unquiesce the application after backup operation

pre HookExecution

PreHook is the Hook executed to quiesce the application before backup operation

post HookExecution

PostHook is the Hook executed to unquiesce the application after backup operation

pre HookExecution

PreHook is the Hook executed to quiesce the application before backup operation

post HookExecution

PostHook is the Hook executed to unquiesce the application after backup operation

status HookStatus

HookComponentStatus

(Appears on: BackupStatus, RestoreStatus)

HookComponentStatus indicates status of hook execution for backup/restore

Field

Description

podReadyWaitSeconds uint16

PodReadyWaitSeconds is the wait time for which hook execution waits before performing hook Quiescing/UnQuiescing It is only applicable for pods which are found in NotRunning state during hook execution Default value is 120s, that will be set by webhook.

hookPriorityStatus []HookPriorityStatus

HookPriorityStatuses specifies pre/post hook execution status for current backup.

HookConfig

(Appears on: BackupComponent, BackupPlanSpec, ComponentConfig, NamespaceSelector, RestoreSpec)

HookConfig defines the sequence of hook actions and their associated pod-container regexes

Field

Description

mode Mode

Mode can be sequential or parallel which defines the way hooks will be executed. If mode is parallel, ignore the hook sequence.

podReadyWaitSeconds uint16

hooks []HookInfo

Hooks defines the config’s for hook action object reference to the matching regexes of pod and containers

HookConfiguration

(Appears on: HookPriority)

HookConfiguration contain’s configuration for hook implementation.

Field

Description

maxRetryCount byte

MaxRetryCount is the maximum number of times pre/post hook execution can be retried. MaxRetryCount will be equal to the RetryCount specified in Hook Spec.

timeoutSeconds uint16

TimeoutSeconds is A Maximum allowed time in seconds to execute Hook. timeout here is a hard timeout. Meaning the command needs to exit in that time, either with exit code 0 or non 0. hook execution will be considered in error if it fails to complete within timeout.

ignoreFailure bool

IgnoreFailure is a boolean, if set to true all the failures will be ignored for both in pre and post hooks Default is false.

HookExecution

(Appears on: HookSpec)

HookExecution specifies the Hook required to quiesce or unquiesce the application

Field

Description

execAction Kubernetes core/v1.ExecAction

ExecAction is a Command to be executed as a part of Hook. Specifies the action to take. Commands should include what shell to use or the commands and its args which will be able to run without the shell. User can provide multiple commands merged as a part of a single command in the ExecAction. Shell Script Ex. [“/bin/bash”, “-c”, “echo hello > hello.txt && echo goodbye > goodbye.txt”]

ignoreFailure bool

IgnoreFailure is a boolean, if set to true all the failures will be ignored both in pre and post hooks Default is false.

maxRetryCount byte

MaxRetryCount count will be used to retry hook execution within the time range specified by Timeout in TimeoutSeconds field. Hook execution will be considered in error if it fails to complete within MaxRetryCount. Each retry count will be run with timeout of TimeoutSeconds field. Default is 0

timeoutSeconds uint16

TimeoutSeconds is A Maximum allowed time in seconds for each retry count according to value set in MaxRetryCount field to execute Hook. timeout here is a hard timeout. MaxRetryCount field is related to TimeoutSeconds, Meaning each retry count will run with a timeout of TimeoutSeconds. The command needs to exit in that time, either with exit code 0 or non 0.

HookInfo

(Appears on: HookConfig)

HookInfo defines the config for hook action object reference to the matching regexes of pod and containers

Field

Description

hook Kubernetes core/v1.ObjectReference

Hook is the object reference of the Hook resource which will be run while quiescing

podSelector PodSelector

PodSelector will identify set of pods for hook config based on either Labels or Regex pattern.

containerRegex string

ContainerRegex identifies containers for hook execution from pods which are filtered using PodSelector. If not given then hooks will be executed in all the containers of the identified pods

HookPriority

(Appears on: HookPriorityStatus)

HookPriority contain hook & their targeted resources

Field

Description

hook Kubernetes core/v1.ObjectReference

Hook is the object reference of the Hook resource which will be run while quiescing

preHookConf HookConfiguration

PreHookConf defines how pre hook implementation will be handled

postHookConf HookConfiguration

PostHookConf defines how post hook implementation will be handled

hookTarget []HookTarget

HookTarget defines targeting hook resources.

HookPriorityStatus

(Appears on: HookComponentStatus)

HookPriorityStatus defines observed state for hooks priority wise.

Field

Description

priority byte

Priority defines priority for hooks. backup controller will use Priority to determine sequence of hook execution. In case of parallel Mode, priority will be same for all, in case of sequential Mode, priority will be same for a group and not individual HookConfig Set. Default Priority is 0.

hooks []HookPriority

Hooks defines list of hooks with priority Priority.

HookSpec

(Appears on: Hook)

HookSpec defines the desired state of Hook.

Field

Description

pre HookExecution

PreHook is the Hook executed to quiesce the application before backup operation

post HookExecution

PostHook is the Hook executed to unquiesce the application after backup operation

HookStatus

(Appears on: Hook)

HookStatus defines the observed state of Hook.

HookTarget

(Appears on: HookPriority)

Field

Description

owner Owner

Owner specifies the parent for identified pods in PodHookStatus. backup controller will fetch pods from Owner to execute the hooks. Owner will be nil for pods with no owner.

containerRegex string

ContainerRegex identifies containers in identified pods to execute hooks.

podHookStatus []PodHookStatus

PodHookStatus specifies pre/post hook execution status for current backup.

KeyValue

(Appears on: HelmTransform)

KeyValue specifies key-value pair for helm transformation

Field

Description

key string

Key denotes the key for which value is to be set

value string

Value denotes the value to be set

License

License is the Schema for the licenses API

Field

Description

Refer to the Kubernetes API documentation for the fields of the metadata field.

spec LicenseSpec

key string

Key is the product key to use triliovault application to perform backup/restore.

key string

Key is the product key to use triliovault application to perform backup/restore.

key string

Key is the product key to use triliovault application to perform backup/restore.

key string

Key is the product key to use triliovault application to perform backup/restore.

status LicenseStatus

LicenseCondition

(Appears on: LicenseStatus)

LicenseCondition specifies the current condition of a license.

Field

Description

status LicenseState

Status is the status of the condition.

timestamp Kubernetes meta/v1.Time

Timestamp is the time a condition occurred.

message string

A brief message indicating details about why the component is in this condition.

phase OperationType

Phase defines the current phase of the controller.

LicenseEdition (`string` alias)

(Appears on: LicenseProperties)

LicenseEdition specifies the edition of the license.

LicenseProperties

(Appears on: LicenseStatus)

LicenseProperties specifies the properties of a license based on provided license key.

Field

Description

company string

Company is the name of a company purchased license for.

edition LicenseEdition

Edition is the type of license purchased to use triliovault application.

creationTimestamp Kubernetes meta/v1.Time

CreationTimestamp is the time license created to use triliovault application.

purchaseTimestamp Kubernetes meta/v1.Time

PurchaseTimestamp is the time user purchased the license to use triliovault application.

expirationTimestamp Kubernetes meta/v1.Time

ExpirationTimestamp is the time provided license going to expire and won’t be able to perform backup/restore operation.

maintenanceExpiryTimestamp Kubernetes meta/v1.Time

MaintenanceExpiryTimestamp is the time maintenance support for the provided license going to expire.

kubeUID string

KubeUID is the kubesystem or namespace uuid of the cluster the license purchased for.

scope Scope

Scope is the scope of a KubeUID the license purchased for.

version string

Version is the version of a license.

sen string

SEN is the unique serial of a license purchased.

numberOfUsers int

NumberOfUsers is the total number of users the license valid for.

serverID string

ServerID is the unique serverID of license purchased.

licenseID string

LicenseID is the identifier for the license.

capacity uint32

Capacity is the maximum capacity to use the license in number of kube nodes.

active bool

Active is the status of the license.

LicenseSpec

(Appears on: License)

LicenseSpec defines the desired state of License

Field

Description

key string

Key is the product key to use triliovault application to perform backup/restore.

LicenseState (`string` alias)

(Appears on: LicenseCondition, LicenseStatus)

LicenseState specifies the overall status of the license.

LicenseStatus

(Appears on: License)

LicenseStatus defines the observed state of License

Field

Description

status LicenseState

Status is the overall status of the license based on provided key.

message string

A brief message indicating details about why the license in this state.

properties LicenseProperties

Properties is the details about the license based on provided license key.

condition []LicenseCondition

Condition is the current condition of a license.

currentNodeCount uint32

CurrentNodeCount is the total number of nodes kubernetes cluster comprised of where each node capped at 2 vCPUs/pCPUs.

gracePeriodStartTimestamp Kubernetes meta/v1.Time

GracePeriodStartTimestamp is the time grace period started to use triliovault application.

gracePeriodEndTimestamp Kubernetes meta/v1.Time

GracePeriodEndTimestamp is the time grace period for using the triliovault application going to end.

maxNodes uint32

MaxNodes is the count of maximum number of nodes available in cluster.

Mode (`string` alias)

(Appears on: HookConfig)

Mode is the enum for 2 modes of quiescing the application components i.e Sequential or Parallel

MonthOfYear (`string` alias)

(Appears on: RetentionConfig)

MultiNamespaceCondition

MultiNamespaceCondition specifies the current condition of a clusterNamespace resource.

Field

Description

status Status

Status is the status of the condition.

timestamp Kubernetes meta/v1.Time

Timestamp is the time a condition occurred.

reason string

A brief message indicating details about why clusterNamespace resource is in this condition.

NFSCredentials

(Appears on: TargetSpec)

NFSCredentials defines the credentials to use NFS as a target type.

Field

Description

nfsExport string

A NFS location in format trilio.net:/data/location/abcde or 192.156.13.1:/user/keeth/data.

nfsOptions string

An additional options passed to mount NFS directory e.g. rw, suid, hard, intr, timeo, retry.

NamespaceSelector

(Appears on: ClusterBackupPlanSpec)

NamespaceSelector defines namespaces for which backups are to be taken based on NamespaceSelector(labels & match expression) & their configurations

Field

Description

name string

Name specify name for NamespaceSelector, useful to identify why namespaces grouped together using LabelSelector

labelSelector []Kubernetes meta/v1.LabelSelector

LabelSelector identifies set of namespaces for which backup are to be taken based on labels & match expression

hookConfig HookConfig

hookConfig defines backup pre/post hooks and their configurations.

includeResources ResourceSelector

IncludeResources specifies the resources included during backup

excludeResources ResourceSelector

ExcludedResources specifies the resources excluded during backup

ObjectStoreCredentials

(Appears on: TargetSpec)

ObjectStoreCredentials defines the credentials to use Object Store as a target type.

Field

Description

url string

URL to connect the Object Store.

accessKey string

AccessKey is to authenticate access to Object Store. Deprecated: after addition of secret object ref

secretKey string

SecretKey is to authenticate access to Object Store. Deprecated: after addition of secret object ref

credentialSecret Kubernetes core/v1.ObjectReference

CredentialSecret is object ref of a secret which contains target credentials like accessKey, secretKey, etc.

bucketName string

BucketName is the name of a bucket within Object Store.

region string

Region where the Object Store resides.

objectLockingEnabled bool

ObjectLockingEnabled specify if target is set to be immutable

Op (`string` alias)

(Appears on: Patch)

Op indicates the Json Patch operations

OperationType (`string` alias)

(Appears on: BackupCondition, BackupStatus, ClusterBackupCondition, ClusterRestoreCondition, ClusterRestoreStatus, Conditions, LicenseCondition, TargetCondition)

OperationType specifies the type of operation for Job

Operator

(Appears on: RestoreOperator, Snapshot)

Operator defines the snapshot of application defined by an Operator.

Field

Description

operatorId string

OperatorId is unique ID for a particular operator

customResources []Resource

CustomResources is the list of all custom resource’s GVK and names list

helm Helm

Helm represents the snapshot of the helm chart for helm based operator

operatorResources []Resource

OperatorResources defines the a kubernetes resources found from Operator resources.

applicationResources []Resource

ApplicationResources defines the kubernetes resources found from operator Custom Resources.

dataSnapshots []DataSnapshot

DataSnapshot specifies the Snapshot of the Volumes defined in the operator resources.

warnings []string

Warnings is the list of warnings captured during backup or restore of an application

OperatorSelector

(Appears on: BackupPlanComponents)

OperatorSelector defines the mapping of operator name and their selectors

Field

Description

operatorId string

OperatorId is any unique ID for a particular operator

customResources []Resource

CustomResources list resources where each resource contains custom resource gvk and metadata

helmRelease string

HelmRelease is the release name of the helm based operator

olmSubscription string

OLMSubscription is the subscription name for the olm based operator

operatorResourceSelector []Kubernetes meta/v1.LabelSelector

Deprecated: OperatorResourceSelector is the selector for operator resources

operatorResources ResourceSelector

OperatorResources specify operator resource selection based on LabelSelector & GVKSelector

applicationResourceSelector []Kubernetes meta/v1.LabelSelector

Deprecated: ApplicationResourceSelector is the selector for instances deployed by the operator resources

applicationResources ResourceSelector

ApplicationResources specify resource selection for instances deployed by the operator resources based on LabelSelector & GVKSelector.

excludeResources ResourceSelector

ExcludeResources specify operator resources to exclude from backup based on LabelSelector & GVKSelector

Owner

(Appears on: HookTarget)

Field

Description

groupVersionKind GroupVersionKind

GroupVersionKind specifies GVK uniquely representing particular owner type.

name string

Name is name of owner

Patch

(Appears on: CustomTransform)

Field

Description

op Op

Op specifies the operation to perform, can be test/add/remove/replace/copy/move

from string

From specifies the source element path. This field is mandatory for copy/move operation

path string

Path specifies the destination element path which needs to be transformed

value Kubernetes apiextensions/v1.JSON

Values specifies the value for any operation. This field is mandatory for test/add/replace operation

PodContainers

(Appears on: DataSnapshot)

PodContainers defines Pod and containers running in that Pod.

Field

Description

podName string

PodName is the name of pod which will be the key for the map between pod containers list

containers []string

Containers is the list of containers inside a pod

PodHookStatus

(Appears on: HookTarget)

PodHookStatus defines observed state for hooks

Field

Description

podName string

PodName is the single pod name from identified sets of pods filtered for hook config.

containerHookStatus []ContainerHookStatus

ContainerHookStatus defines status for filtered containers in a pod named ‘PodName’ One Container can have multiple hook executions.

PodSelector

(Appears on: HookInfo)

PodSelector selects pods for hook execution based on either Labels or Regex pattern. Both Labels & Regex can also specify

Field

Description

labels []Kubernetes meta/v1.LabelSelector

regex string

Policy

Policy is the Schema for the policies API

Field

Description

Refer to the Kubernetes API documentation for the fields of the metadata field.

spec PolicySpec

type PolicyType

Type is a field of Policy spec, which defines the policy type containing only 3 values: Retention, Timeout, Cleanup.

default bool

Default field states if the current type of policy is default across the TV application

retentionConfig RetentionConfig

RetentionConfig field defines the configuration for Retention policies

timeoutConfig TimeoutConfig

TimeoutConfig field defines the configuration for timeout policies

cleanupConfig CleanupConfig

CleanupConfig field defines the configuration for Cleanup policies

scheduleConfig Crons

ScheduleConfig field defines the configuration for Schedule policies

type PolicyType

Type is a field of Policy spec, which defines the policy type containing only 3 values: Retention, Timeout, Cleanup.

default bool

Default field states if the current type of policy is default across the TV application

retentionConfig RetentionConfig

RetentionConfig field defines the configuration for Retention policies

timeoutConfig TimeoutConfig

TimeoutConfig field defines the configuration for timeout policies

cleanupConfig CleanupConfig

CleanupConfig field defines the configuration for Cleanup policies

scheduleConfig Crons

ScheduleConfig field defines the configuration for Schedule policies

type PolicyType

Type is a field of Policy spec, which defines the policy type containing only 3 values: Retention, Timeout, Cleanup.

default bool

Default field states if the current type of policy is default across the TV application

retentionConfig RetentionConfig

RetentionConfig field defines the configuration for Retention policies

timeoutConfig TimeoutConfig

TimeoutConfig field defines the configuration for timeout policies

cleanupConfig CleanupConfig

CleanupConfig field defines the configuration for Cleanup policies

scheduleConfig Crons

ScheduleConfig field defines the configuration for Schedule policies

type PolicyType

Type is a field of Policy spec, which defines the policy type containing only 3 values: Retention, Timeout, Cleanup.

default bool

Default field states if the current type of policy is default across the TV application

retentionConfig RetentionConfig

RetentionConfig field defines the configuration for Retention policies

timeoutConfig TimeoutConfig

TimeoutConfig field defines the configuration for timeout policies

cleanupConfig CleanupConfig

CleanupConfig field defines the configuration for Cleanup policies

scheduleConfig Crons

ScheduleConfig field defines the configuration for Schedule policies

status PolicyStatus

PolicySpec

(Appears on: Policy)

PolicySpec defines the desired state of Policy

Field

Description

type PolicyType

Type is a field of Policy spec, which defines the policy type containing only 3 values: Retention, Timeout, Cleanup.

default bool

Default field states if the current type of policy is default across the TV application

retentionConfig RetentionConfig

RetentionConfig field defines the configuration for Retention policies

timeoutConfig TimeoutConfig

TimeoutConfig field defines the configuration for timeout policies

cleanupConfig CleanupConfig

CleanupConfig field defines the configuration for Cleanup policies

scheduleConfig Crons

ScheduleConfig field defines the configuration for Schedule policies

PolicyStatus

(Appears on: Policy)

PolicyStatus defines the observed state of Policy

PolicyType (`string` alias)

(Appears on: PolicySpec)

PolicyType is the Enum for types of policies

PrePostHookStatus

(Appears on: ContainerHookStatus)

PrePostHookStatus defines Pre and Post hook execution status.

Field

Description

status Status

Status is the status for pre/post hook execution

exitStatus string

ExitStatus contains returned exit code and error trace after pre/post hook execution

retryCount byte

RetryCount count used to retry hook execution within the time range specified by Timeout. This is the actual number of times backup controller retried for pre/post hook execution if MaxRetryCount>0. Default is 0

Resource

(Appears on: ClusterRestoreStatus, ComponentStatus, Custom, CustomTransform, Helm, Operator, OperatorSelector, ResourceSelector, RestoreConfig, RestoreSpec, RestoreStatus, TransformStatus)

Resource defines the list of names of a Kubernetes resource of a particular GVK.

Field

Description

groupVersionKind GroupVersionKind

GroupVersionKind specifies GVK uniquely representing particular resource type.

objects []string

Objects is the list of names of all the objects of the captured GVK

ResourceSelector

(Appears on: BackupComponent, BackupPlanSpec, ClusterBackupPlanSpec, CustomSelector, NamespaceSelector, OperatorSelector)

ResourceSelector used to define include/exclude resources as well as other resource selection, resource selection can be done using LabelSelector(MatchLabels & MatchExpression) & GVKSelector(GVK based & object names).

Field

Description

labelSelector []Kubernetes meta/v1.LabelSelector

LabelSelector specifies resource selection using labels & match expression

gvkSelector []Resource

GVKSelector specify resource selection using GVK & object name based selection Default ignore list won’t be considered for these resources and will always be backed up whatever is specified

Restore

Restore is the Schema for the restores API

Field

Description

Refer to the Kubernetes API documentation for the fields of the metadata field.

spec RestoreSpec

source RestoreSource

Source defines the source referred for performing restore operation

restoreNamespace string

Namespace is a name of namespace in cluster where backed resources will be restored Deprecated: Restore will be allowed only in Restore CR Namespace so RestoreNamespace is redundant.

skipIfAlreadyExists bool

SkipIfAlreadyExists specifies whether to skip restore of a resource if already exists in the namespace restored. Deprecated: SkipIfAlreadyExists flag is now moved under RestoreFlags struct

patchIfAlreadyExists bool

PatchIfAlreadyExists specifies whether to patch spec of a already exists resource in the namespace restored. Deprecated: PatchIfAlreadyExists flag is now moved under RestoreFlags struct

patchCRD bool

PatchCRD specifies whether to patch spec of a already exists crd. Deprecated: PatchCRD flag is now moved under RestoreFlags struct

omitMetadata bool

OmitMetadata specifies whether to omit metadata like labels, annotations of resources while restoring them. Deprecated: OmitMetadata flag is now moved under RestoreFlags struct

skipOperatorResources bool

SkipOperatorResources specifies whether to skip operator resources or not at the time of restore. (for the use case when operator is already present and the application of that operator needs to be restored) Deprecated: SkipOperatorResources flag is now moved under RestoreFlags struct

disableIgnoreResources bool

DisableIgnoreResources is responsible for the behavior of default list of resources being ignored at the restore. If set to true, those resources will not be ignored Deprecated: DisableIgnoreResources flag is now moved under RestoreFlags struct

restoreFlags RestoreFlags

actionFlags ActionFlags

Env is the List of environment variables to set in the container. Cannot be updated.

transformComponents TransformComponents

TransformComponents specifies the component-wise transformation configuration

excludeResources []Resource

ExcludeResources specifies the resources to be excluded from backup while restoring

hookConfig HookConfig

HookConfig specifies the Post Restore Hooks Executed in reverse sequence of the sequence specified here

cleanupOnFailure bool

CleanupOnFailure is flag to perform cleanup after restore fails. Defaults to false Deprecated: CleanupOnFailure flag is now moved under ActionFlags struct

protectRestoredApp bool

ProtectRestoredApp decides if T4K will setup a backupplan to protect the restored application. Deprecated: ProtectRestoredApp flag is now moved under ActionFlags struct

encryption Encryption

Encryption specify encryption key to decrypt the encrypted data.

source RestoreSource

Source defines the source referred for performing restore operation

restoreNamespace string

Namespace is a name of namespace in cluster where backed resources will be restored Deprecated: Restore will be allowed only in Restore CR Namespace so RestoreNamespace is redundant.

skipIfAlreadyExists bool

SkipIfAlreadyExists specifies whether to skip restore of a resource if already exists in the namespace restored. Deprecated: SkipIfAlreadyExists flag is now moved under RestoreFlags struct

patchIfAlreadyExists bool

PatchIfAlreadyExists specifies whether to patch spec of a already exists resource in the namespace restored. Deprecated: PatchIfAlreadyExists flag is now moved under RestoreFlags struct

patchCRD bool

PatchCRD specifies whether to patch spec of a already exists crd. Deprecated: PatchCRD flag is now moved under RestoreFlags struct

omitMetadata bool

OmitMetadata specifies whether to omit metadata like labels, annotations of resources while restoring them. Deprecated: OmitMetadata flag is now moved under RestoreFlags struct

skipOperatorResources bool

disableIgnoreResources bool

restoreFlags RestoreFlags

actionFlags ActionFlags

Env is the List of environment variables to set in the container. Cannot be updated.

transformComponents TransformComponents

TransformComponents specifies the component-wise transformation configuration

excludeResources []Resource

ExcludeResources specifies the resources to be excluded from backup while restoring

hookConfig HookConfig

HookConfig specifies the Post Restore Hooks Executed in reverse sequence of the sequence specified here

cleanupOnFailure bool

CleanupOnFailure is flag to perform cleanup after restore fails. Defaults to false Deprecated: CleanupOnFailure flag is now moved under ActionFlags struct

protectRestoredApp bool

ProtectRestoredApp decides if T4K will setup a backupplan to protect the restored application. Deprecated: ProtectRestoredApp flag is now moved under ActionFlags struct

encryption Encryption

Encryption specify encryption key to decrypt the encrypted data.

source RestoreSource

Source defines the source referred for performing restore operation

restoreNamespace string

Namespace is a name of namespace in cluster where backed resources will be restored Deprecated: Restore will be allowed only in Restore CR Namespace so RestoreNamespace is redundant.

skipIfAlreadyExists bool

SkipIfAlreadyExists specifies whether to skip restore of a resource if already exists in the namespace restored. Deprecated: SkipIfAlreadyExists flag is now moved under RestoreFlags struct

patchIfAlreadyExists bool

PatchIfAlreadyExists specifies whether to patch spec of a already exists resource in the namespace restored. Deprecated: PatchIfAlreadyExists flag is now moved under RestoreFlags struct

patchCRD bool

PatchCRD specifies whether to patch spec of a already exists crd. Deprecated: PatchCRD flag is now moved under RestoreFlags struct

omitMetadata bool

OmitMetadata specifies whether to omit metadata like labels, annotations of resources while restoring them. Deprecated: OmitMetadata flag is now moved under RestoreFlags struct

skipOperatorResources bool

disableIgnoreResources bool

restoreFlags RestoreFlags

actionFlags ActionFlags

Env is the List of environment variables to set in the container. Cannot be updated.

transformComponents TransformComponents

TransformComponents specifies the component-wise transformation configuration

excludeResources []Resource

ExcludeResources specifies the resources to be excluded from backup while restoring

hookConfig HookConfig

HookConfig specifies the Post Restore Hooks Executed in reverse sequence of the sequence specified here

cleanupOnFailure bool

CleanupOnFailure is flag to perform cleanup after restore fails. Defaults to false Deprecated: CleanupOnFailure flag is now moved under ActionFlags struct

protectRestoredApp bool

ProtectRestoredApp decides if T4K will setup a backupplan to protect the restored application. Deprecated: ProtectRestoredApp flag is now moved under ActionFlags struct

encryption Encryption

Encryption specify encryption key to decrypt the encrypted data.

source RestoreSource

Source defines the source referred for performing restore operation

restoreNamespace string

Namespace is a name of namespace in cluster where backed resources will be restored Deprecated: Restore will be allowed only in Restore CR Namespace so RestoreNamespace is redundant.

skipIfAlreadyExists bool

SkipIfAlreadyExists specifies whether to skip restore of a resource if already exists in the namespace restored. Deprecated: SkipIfAlreadyExists flag is now moved under RestoreFlags struct

patchIfAlreadyExists bool

PatchIfAlreadyExists specifies whether to patch spec of a already exists resource in the namespace restored. Deprecated: PatchIfAlreadyExists flag is now moved under RestoreFlags struct

patchCRD bool

PatchCRD specifies whether to patch spec of a already exists crd. Deprecated: PatchCRD flag is now moved under RestoreFlags struct

omitMetadata bool

OmitMetadata specifies whether to omit metadata like labels, annotations of resources while restoring them. Deprecated: OmitMetadata flag is now moved under RestoreFlags struct

skipOperatorResources bool

disableIgnoreResources bool

restoreFlags RestoreFlags

actionFlags ActionFlags

Env is the List of environment variables to set in the container. Cannot be updated.

transformComponents TransformComponents

TransformComponents specifies the component-wise transformation configuration

excludeResources []Resource

ExcludeResources specifies the resources to be excluded from backup while restoring

hookConfig HookConfig

HookConfig specifies the Post Restore Hooks Executed in reverse sequence of the sequence specified here

cleanupOnFailure bool

CleanupOnFailure is flag to perform cleanup after restore fails. Defaults to false Deprecated: CleanupOnFailure flag is now moved under ActionFlags struct

protectRestoredApp bool

ProtectRestoredApp decides if T4K will setup a backupplan to protect the restored application. Deprecated: ProtectRestoredApp flag is now moved under ActionFlags struct

encryption Encryption

Encryption specify encryption key to decrypt the encrypted data.

status RestoreStatus

RestoreApplication

(Appears on: RestoreStatus)

RestoreApplication defines the snapshot contents of an Application Backup.

Field

Description

helmCharts []RestoreHelm

HelmCharts specifies the backed up helm resources restored as Helm Charts.

operators []RestoreOperator

Operators specifies the backed up operator resources restored as Operators.

custom RestoreCustom

Custom specifies the backup up kubernetes resources.

RestoreCondition

(Appears on: RestoreStatus)

RestoreCondition specifies the current condition of a restore resource.

Field

Description

status Status

Status is the status of the condition.

timestamp Kubernetes meta/v1.Time

Timestamp is the time a condition occurred.

reason string

A brief message indicating details about why the component is in this condition.

phase RestorePhase

Phase defines the current phase of the controller.

RestoreConfig

(Appears on: ClusterRestoreSpec, ComponentConfig)

Field

Description

restoreFlags RestoreFlags

transformComponents TransformComponents

excludeResources []Resource

RestoreCustom

(Appears on: RestoreApplication)

RestoreCustom defines the backed up kubernetes resources.

Field

Description

snapshot Custom

Snapshot defines the snapshot of custom application to be restored.

status ComponentStatus

Status specifies the details of component restore in a namespace

RestoreFlags

(Appears on: RestoreConfig, RestoreSpec)

Field

Description

skipIfAlreadyExists bool

SkipIfAlreadyExists specifies whether to skip restore of a resource if already exists in the namespace restored.

patchIfAlreadyExists bool

PatchIfAlreadyExists specifies whether to patch spec of a already exists resource in the namespace restored.

patchCRD bool

PatchCRD specifies whether to patch spec of a already exists crd.

omitMetadata bool

OmitMetadata specifies whether to omit metadata like labels, annotations of resources while restoring them.

skipOperatorResources bool

disableIgnoreResources bool

DisableIgnoreResources is responsible for the behavior of default list of resources being ignored at the restore. If set to true, those resources will not be ignored

onlyData bool

OnlyData flag decides if the restore operation will only restore data components.

onlyMetadata bool

OnlyMetadata flag decides if the restore operation will only restore metadata components.

RestoreHelm

(Appears on: RestoreApplication)

RestoreHelm defines the backed up helm application to be restored.

Field

Description

snapshot Helm

Snapshot defines the snapshot of application to be restored by a Helm.

status ComponentStatus

Status specifies the details of component restore in a namespace

RestoreOperator

(Appears on: RestoreApplication)

RestoreOperator defines the backed up operator application to be restored.

Field

Description

snapshot Operator

Snapshot defines the snapshot of application to be restored by a Operator.

status ComponentStatus

Status specifies the details of component restore in a namespace

RestorePhase (`string` alias)

(Appears on: ComponentStatus, RestoreCondition, RestoreStatus)

nolint:lll // too long line RestorePhase specifies the one of phase of Restore operation

RestoreSource

(Appears on: RestoreSpec)

RestoreSource defines the source from where the restore is to be done

Field

Description

type RestoreSourceType

Type is the type of source for restore

Backup is a reference to the Backup instance restored if type is Backup.

Target is a reference to the Target instance where from restore is performed if type is Location.

location string

Location is an absolute path to remote target from where restore is performed if type is Location.

BackupPlan is a reference to the BackupPlan whose latest successful backup is to be restored.

RestoreSourceType (`string` alias)

(Appears on: RestoreSource)

BackupSourceType defines the type of source for restore

RestoreSpec

(Appears on: Restore)

RestoreSpec defines the desired state of Restore

Field

Description

source RestoreSource

Source defines the source referred for performing restore operation

restoreNamespace string

Namespace is a name of namespace in cluster where backed resources will be restored Deprecated: Restore will be allowed only in Restore CR Namespace so RestoreNamespace is redundant.

skipIfAlreadyExists bool

SkipIfAlreadyExists specifies whether to skip restore of a resource if already exists in the namespace restored. Deprecated: SkipIfAlreadyExists flag is now moved under RestoreFlags struct

patchIfAlreadyExists bool

PatchIfAlreadyExists specifies whether to patch spec of a already exists resource in the namespace restored. Deprecated: PatchIfAlreadyExists flag is now moved under RestoreFlags struct

patchCRD bool

PatchCRD specifies whether to patch spec of a already exists crd. Deprecated: PatchCRD flag is now moved under RestoreFlags struct

omitMetadata bool

OmitMetadata specifies whether to omit metadata like labels, annotations of resources while restoring them. Deprecated: OmitMetadata flag is now moved under RestoreFlags struct

skipOperatorResources bool

disableIgnoreResources bool

restoreFlags RestoreFlags

actionFlags ActionFlags

Env is the List of environment variables to set in the container. Cannot be updated.

transformComponents TransformComponents

TransformComponents specifies the component-wise transformation configuration

excludeResources []Resource

ExcludeResources specifies the resources to be excluded from backup while restoring

hookConfig HookConfig

HookConfig specifies the Post Restore Hooks Executed in reverse sequence of the sequence specified here

cleanupOnFailure bool

CleanupOnFailure is flag to perform cleanup after restore fails. Defaults to false Deprecated: CleanupOnFailure flag is now moved under ActionFlags struct

protectRestoredApp bool

ProtectRestoredApp decides if T4K will setup a backupplan to protect the restored application. Deprecated: ProtectRestoredApp flag is now moved under ActionFlags struct

encryption Encryption

Encryption specify encryption key to decrypt the encrypted data.

RestoreStats

(Appears on: RestoreStatus)

RestoreStats defines the stats for a Restore

Field

Description

BackupPlan is the reference to BackupPlan associated with Restore

Backup is the reference to the Backup associated with Restore

RestoreStatus

(Appears on: Restore)

RestoreStatus defines the observed state of Restore

Field

Description

restoreScope ComponentScope

RestoreScope indicates scope of component being restored i.e. App or Namespace.

applicationType ApplicationType

ApplicationType is the type of Application restored in the App Scoped backup

startTimestamp Kubernetes meta/v1.Time

StartTimestamp is the time a restore was started.

completionTimestamp Kubernetes meta/v1.Time

CompletionTimestamp is the time a restore was finished.

phase RestorePhase

Phase is the current phase of the restore operation.

phaseStatus Status

PhaseStatus is the status of phase restore operation going through.

status Status

Status is the status of the restore operation.

size k8s.io/apimachinery/pkg/api/resource.Quantity

Size is the aggregate size of the data restored back.

percentageCompletion byte

PercentageCompletion is the amount of restore operation completed.

restoreApplication RestoreApplication

RestoreApplication defines the information about the different applications restored back to cluster.

hookStatus HookComponentStatus

HookStatus specifies pre/post hook execution status for current backup.

condition []RestoreCondition

Condition is the current condition of restore resource.

stats RestoreStats

Duration is the amount of time the restore process took to finish.

protectingResources []Resource

ProtectingResources lists the Trilio resources and dependent resources which are getting created after user application restore operation. It’s applicable only if ProtectRestoredApp is set to true.

RestoreSummary

(Appears on: BackupPlanStats)

RestoreSummary comprises of restore object references and count of restore with different statuses

Field

Description

lastSuccessfulRestore Kubernetes core/v1.ObjectReference

LastSuccessfulRestore is the reference to Latest completed Restore of a BackupPlan

totalInProgressRestores uint32

TotalInProgressRestores is the count of total number of InProgress Restores

totalCompletedRestores uint32

TotalCompletedRestores is the count of total number of Completed Restores

totalFailedRestores uint32

TotalFailedRestores is the count of total number of Failed Restores

RetentionConfig

(Appears on: PolicySpec)

RetentionConfig is the configuration for the PolicyType: Retention

Field

Description

latest int

Latest is the max number of latest backups to be retained

weekly int

Weekly is max number of backups to be retained in a week

monthly int

Monthly is max number of backups to be retained in a month

yearly int

Yearly is max number of backups to be retained in a year

dayOfWeek DayOfWeek

DayOfWeek is Day of the week to maintain weekly backup/restore resources

dateOfMonth int

DateOfMonth is Date of the month to maintain monthly backup/restore resources

monthOfYear MonthOfYear

MonthOfYear is the month of the backup to retain for yearly backups

SchedulePolicy

(Appears on: BackupConfig)

SchedulePolicy contains the object references for incremental or full backup type schedule policy

Field

Description

incrementalCron CronSpec

IncrementalCron is the cronspec schedule for incremental backups Deprecated: IncrementalCron will be used as an object reference of schedule type policy.

fullBackupCron CronSpec

FullBackupCron is the cronspec schedule for full backups Deprecated: FullBackupCron will be used as an object reference of schedule type policy.

incrementalBackupPolicy Kubernetes core/v1.ObjectReference

IncrementalBackupPolicy is the object reference for the policy of type schedule defined

fullBackupPolicy Kubernetes core/v1.ObjectReference

FullBackupPolicy is the object reference for the policy of type schedule defined

Scope (`string` alias)

(Appears on: LicenseProperties)

Scope specifies the scope of a resource.

Snapshot

(Appears on: BackupStatus)

Snapshot defines the snapshot contents of an Application Backup.

Field

Description

helmCharts []Helm

HelmCharts specifies the snapshot of application defined by Helm Charts.

operators []Operator

Operators specifies the snapshot of application defined by Operators.

custom Custom

Custom specifies the snapshot of Custom defined applications.

Status (`string` alias)

(Appears on: BackupCondition, BackupInfo, BackupPlanInfo, BackupPlanStatus, BackupStatus, ClusterBackupCondition, ClusterBackupPlanCondition, ClusterBackupPlanStatus, ClusterBackupStatus, ClusterRestoreCondition, ClusterRestoreStatus, ComponentInfo, ComponentStatus, Conditions, MultiNamespaceCondition, PrePostHookStatus, RestoreCondition, RestoreStatus, TargetCondition, TargetStatus, TransformStatus, VolumeSnapshot)

Status specifies the status of WorkloadJob operating on

Target

Target is a location where Trilio stores backup.

Field

Description

Refer to the Kubernetes API documentation for the fields of the metadata field.

spec TargetSpec

type TargetType

Type is the type of target for backup storage.

vendor Vendor

Vendor is the third party storage vendor hosting the target

nfsCredentials NFSCredentials

NfsCredentials specifies the credentials for TargetType NFS

objectStoreCredentials ObjectStoreCredentials

ObjectStoreCredentials specifies the credentials for TargetType ObjectStore

enableBrowsing bool

EnableBrowsing specifies if target browser feature should be enabled for this target or not

thresholdCapacity k8s.io/apimachinery/pkg/api/resource.Quantity

ThresholdCapacity is the maximum threshold capacity to store backup data.

type TargetType

Type is the type of target for backup storage.

vendor Vendor

Vendor is the third party storage vendor hosting the target

nfsCredentials NFSCredentials

NfsCredentials specifies the credentials for TargetType NFS

objectStoreCredentials ObjectStoreCredentials

ObjectStoreCredentials specifies the credentials for TargetType ObjectStore

enableBrowsing bool

EnableBrowsing specifies if target browser feature should be enabled for this target or not

thresholdCapacity k8s.io/apimachinery/pkg/api/resource.Quantity

ThresholdCapacity is the maximum threshold capacity to store backup data.

type TargetType

Type is the type of target for backup storage.

vendor Vendor

Vendor is the third party storage vendor hosting the target

nfsCredentials NFSCredentials

NfsCredentials specifies the credentials for TargetType NFS

objectStoreCredentials ObjectStoreCredentials

ObjectStoreCredentials specifies the credentials for TargetType ObjectStore

enableBrowsing bool

EnableBrowsing specifies if target browser feature should be enabled for this target or not

thresholdCapacity k8s.io/apimachinery/pkg/api/resource.Quantity

ThresholdCapacity is the maximum threshold capacity to store backup data.

type TargetType

Type is the type of target for backup storage.

vendor Vendor

Vendor is the third party storage vendor hosting the target

nfsCredentials NFSCredentials

NfsCredentials specifies the credentials for TargetType NFS

objectStoreCredentials ObjectStoreCredentials

ObjectStoreCredentials specifies the credentials for TargetType ObjectStore

enableBrowsing bool

EnableBrowsing specifies if target browser feature should be enabled for this target or not

thresholdCapacity k8s.io/apimachinery/pkg/api/resource.Quantity

ThresholdCapacity is the maximum threshold capacity to store backup data.

status TargetStatus

TargetCondition

(Appears on: TargetStatus)

TargetCondition specifies the current condition of a target resource.

Field

Description

status Status

Status is the status of the condition.

timestamp Kubernetes meta/v1.Time

Timestamp is the time a condition occurred.

reason string

A brief message indicating details about why the component is in this condition.

phase OperationType

Phase defines the current phase of the controller.

TargetInfo

(Appears on: BackupStats, ClusterBackupStats)

TargetInfo contains minimal information about target populated in backup stats

Field

Description